


The exclusive HPC-1 burner system incorporated in all of our KBB systems pre-heats the fuel with hot water created by the system itself, unlike all other burner units available that heat the fuel electrically. This hydronic heating of the fuel eliminates all of the problems associated with the electric elements found on other units, including carbon and grit build up, nozzle clogging, high maintenance and high energy costs. As these burners sit idle between cycles, the element continues to heat the fuels. This constant baking creates carbonization, which clogs the system and causes burner failure. It is common for these systems to require an annual overhaul, which costs up to $800.00! The HPC-1 completely eliminates these problems and costs!
There are over 500 Kingbuilt boilers using this gun in the field today; these guns have very high reliability. The factory has never had to rebuild a gun. Competitors regularly are rebuilding their guns at a cost of $800.00 or more!
These units are designed to run 300 hours between cleanings and have an hour counter attached and “clean” light; cleaning takes 10-15 minutes with a shopvac and wire brush.

KBB Waste/Used-Oil Boiler
Boiler systems start at $4930 for an 85,000 BTU unit. There is a complete line of accessories available, including a glycerin kit. The optional on-demand air pump is $488. This pump runs only when the unit is firing, extending the lifetime of the pump.
KBF-200
The newest product on the Kingbuilt line is the KBF-200 forced air system. This forced-air system is 200,000 BTUs. It utilizes the same gun and preheating technology as the boiler unit. The cost of the system is KBF-200 forced air system is $5100.00. The price includes the fuel strainer and supply pump. This unit also has a 300 hour cleaning cycle with counter and light system and is cleaned in 10 minutes with a shop vac.
